91 Strands Aluminum Wire Stranded Conductor Overhead Cable
1. Applications
Conductor(AAC and ACSR) have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity.And they are also suitable for laying across rivers valleys and the places where special geographical features exist.
2. Service Performance
(1).The permissible long-time operating temperature for aerial conductor is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the conductor beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
3.Product Performance
(1).The electrical performance of AAC and ACSR is indicated in DCΩ/km(20oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.
(2).The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min.tensile of corresponding size specified in the standard for aluminum wire.
(3).The rated tensile strengh of ACSR is denoted with sum of all aluminum conductorstensile strength and steels tensile strength.
a.The tensile strength of all aluminum conductors is denoted with the result of all cross-sections of aluminum conductors multiplied by min.tensile strength of corresponding size specified in the standard for aluminum wire.
b.The tensile strength of all steel wire is denoted with the result of all cross-sections of steel wires multiplied by the stress at 1% elongation of corresponding size specified in the standard for steel wire.
4.Material Standard
(1).The hard aluminum conductor used for AAC and ACSR conforms to the standard GB/T 17048-1997(equivalent to IEC 60889:1987).
(2).The zinc coated steel wire used for ACSR conforms to IEC 60888:1987.
(3).Production can be arranged according to customers requirements for material standard,etc.
Construction of All Aluminum Conductor and Aluminum Conductor Steel Reinforced
5.Chinese Standard
| New Type |
Original Type |
Name |
Range of Sectional Area |
| JL |
LJ |
All Aluminum Conductor |
10-1500 |
| JL/G1A JL/G1B JL/G2A JL/G2B JL/G3A |
LGJ |
Aluminum Conductor Steel Reinforced |
16-1250 |
| JL/G1AF JL/G2AF JL/G3AF |
LGJF |
Corrosion-Resistant Aluminum Conductor Steel Reinforced |
16-1250 |
| JLHA1 JLHA2 |
LHAJ |
All Aluminum Alloy Conductor |
16-1250 |
| JLHA1/G1A JLHA1/G1B JLHA1/G3A JLHA2/G1A JLHA2/G1B JLHA1/G3A |
LHAGJ |
Aluminum Alloy Conductor Steel Reinforced |
16-1120 |
| JL/LHA1 JL/LHA2 |
LLHAGJ |
Aluminum Conductor Aluminum Alloy Reinforced |
16-1400 |
| JL/LB1A |
LLBGJ |
Aluminum Conductor Steel Coated Aluminum Reinforced |
16-1250 |
| JLHA2/LB1A JLHA1/LB1A |
LHALBGJ |
Aluminum Alloy Conductor Aluminum Coated Steel Reinforced |
16-1250 |
| JG1A JG1B JG2A JG3A |
GJ |
All Steel Stranded Conductor |
6-63(27.1mm2-427mm2) |
| JLB1A JLB1B JLB2 |
LBGJ |
Aluminum Coated Steel Conductor |
4-200(12mm2-600mm2) |
Our company
Yifang Electric group mainly specialized in wire&cables,including designment,production and sale.
Products are mainly covering low,medium,high voltage(1KV to 220KV) XLPE Insulated power cable,PVC insulated power cable,ABC cable,building cable control cable,rubber cable welding cable Etc.
Our XLPE cable can be manufactured according to the company's specification which is equivalent to IEC 60502,IEC60332,IEC60754. Some indexes are superior to above international standard.
Our certificate
FAQ
1.Q:Are you a factory or trading company?
A: Manufacturing base in Henan ,China, with more than 500 workers.
2.Q:How can I visit there?
A: Sure,If you need,we will arrange the driver to pick you up.
3.Q:How can I get some samples?
A: Contact me on below,Determin sample and address for shipping.
4.Q:Have you ever supplied cables to our country?
A: Yifang Cables have been sold to over 100 countries and regions in the world. can you contact me for details.
5.Q:What is your MOQ?
A: MOQ Normally 500 meters for big diameter cables.Please contact me for detail info if you have specific cable requirement.
6. Q:When can I get the price?
A: Usually quote within 6 hours after we get your inquiry.
7.Q:How long is your delivery time?
A: According to your order's quantity.Usually our lead time is 3 - 20 working days.
Audited Supplier 
){kind=link}
){kind=link}